Brewing coffee with Nespresso capsules (or B-brands thereof)
Step 1
Remove the cup from under the appliance (this is done by turning the cup counterclockwise) and turn the Presso X over.
Step 2
Then disassemble the extension by turning it counterclockwise. Below is a capsule holder that only fits Nespresso capsules or B brands thereof.
Step 3
Put a capsule in the capsule holder.
Do not place reusable ones here, as this may damage the device and the Presso X comes standard with a refillable adapter.
Step 4
Then reassemble the extension and the cup to the appliance.
Step 5
Open the lid of the water tank by pressing the gray clip. Fill the water tank to the desired amount and then close the lid.
Step 6
Press the power button twice to start the device. The water will heat up for 4 minutes. After these 4 minutes, the coffee will be brewed.
Making coffee with ground coffee
Step 1
Remove the head from under the device and turn the Presso X over.
Step 2
Then unscrew the extension and detach the capsule adapter and the connecting ring around it, you do this by turning it counterclockwise. This connection ring may be omitted from the ground coffee adapter.
Step 3
Fill the spoon supplied with ground coffee.
Step 4
Empty the spoon into the ground coffee adapter.
Step 5
Place the extension on top of the ground coffee adapter.
Step 6
Then move the extension and the adapter on top of the Presso X, and fix it by turning the extension clockwise.
Step 7
Press the power button twice to start the device. The water will now heat up for 4 minutes. After these 4 minutes, the coffee will be brewed.
Step 8
Enjoy the delicious coffee!